Anaerobic glove box made of transparent acrylic with excellent visibility.

●Anaerobic chamber made of all acrylic.
Quickly creates the desired oxygen concentration environment by vacuuming and gas replacement with N2 or other gases.　　　　　　　　　　　　　　●Equipment can be loaded and unloaded through the left side door, and samples can be loaded and unloaded through the right side pass box.　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　●The chamber is designed to be strong enough to withstand a complete vacuum.
Butyl gloves are used to prevent gas permeation.
The oxygen analyzer is equipped with a sensor cable with a measurement range of 0.0 to 25.0%, a resolution of 0.1%, and a measurement accuracy of ±0.5%.
Custom-made modifications are available, such as changing the dimensions of the main unit and pass box, the sensor installation position, and the glove.　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　●This glove box is designed to withstand a full vacuum in both the main body and the pass box, but rapid suction and aspiration may cause damage and accelerate deterioration of the glove box.　　　　　　　　　　　　　　　　　　　　　●When using as a vacuum desiccator, be sure to use it with the glove cap in place.　　　　　　　　　　　　　　　　　　●The vacuum gauge indicates the differential pressure between atmospheric pressure and the inside of the glove box. (Unit: MPa)　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　●Internal operation under reduced pressure is not possible.　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　●Since both the main unit and the pass box are made of acrylic, sterilization with alcohols may cause surface cracks or other deterioration. Wiping with neutral detergent is recommended.